Mastheads for furling masts

The furling mastheads are specific and only exist in a non-retracted version, by design, either for masthead rigging or for fractional rigging.

MASTHEADS CONFIGURATIONS

config_TDM_enroul_largeur

The furling mastheads only exist without shrinkage.

Several possible configurations, depending on the profiles.

⊕ masthead rig, non tapered Bolted /Welded masthead

⊕ Fractional rig, non-tapered : Bolted masthead (former welded masthead = contact us)

THE DIFFERENT SPARCRAFT MASTHEADS

⊕ Masthead rig without taper

(Bolted masthead)

Furlingmasts_TDM_tete_boul

⊕ Masthead rig without taper

(Welded masthead)

Furlingmasts_TDM-_tete_soude

⊕ Fractional rig without taper

(Bolted masthead)

$Masthead for furling mast - fractional rig - bolted$

FEATURES & OPTIONS

OVERVIEW

STANDARD CONFIGURATION : BOLTED MASTHEAD

Furlingmasts_TDM_tete_boul

COMPARE MODELS

MASTHEAD TOGGLE KITS

SPINNAKER CRANES

TIPS & RECOMMENDATIONS

Masthead Equipment
– Fitting of equipment (navigation lights,…) on land : complete this installation at the end. cut down the amount of times you have to climb the mast and make sure they fit before stepping;
– Fitting from the top : prepare the fragile elements (aerials and/or wind indicators), but do not fix them until the mast is stepped and checked (temporary fitting of aerial upside down before fiitting). Please consult the instructions from the manufacturers of such equipment and the recommendations from the crane-driver during the liftng process.

MASTHEAD LIGHTS

TECHNICAL INFO.

MASHEAD LIGHTS E SECTIONS COMMERCIAL SHEET CONTACT A DEALER

Search

The furling mastheads are specific and only exist in a non-retracted version, by design, either for masthead rigging or for fractional rigging.

MASTHEADS CONFIGURATIONS

THE DIFFERENT SPARCRAFT MASTHEADS

FEATURES & OPTIONS

SHARE THE CONTENT OF THIS PAGE